Mechanical Engineering | Aditya College of Engineering & Technology

Department of Mechanical Engineering





The Department of Mechanical Engineering is a pioneer department since the establishment of college in 2011. The department has extensive facilities in terms of faculty, infrastructure & equipment. The department is recognised as a research centre by JNTUK, Kakinada for pursuing Ph.D. programme in Mechanical Engineering. The department has spacious laboratories and well equipped with experimental set-ups as per the requirement of the curriculum. The faculty are very active and encourage the students in fabricating real models viz., Go-kart, Robots, Solar based vehicles and other working models, which are very useful in day to day life and teach students with live examples.

The department has an entrepreneurship cell through which it organises lectures by successful entrepreneurs, bank officers, MSME officials to nurture them as successful entrepreneurs in future. To nurture the students to gain all-round development, the department has many clubs like, ‘cultural club’, “We can talk” to improve soft skills and improve their intra and inter-personal skills, interactive skills to make them leaders of tomorrow. The faculty encourages students to participate in competitions like Go-kart at National level and present technical papers in conferences and publish papers in journals.

Mr. T. Sri Rama Sagar

Head of Department - MECH-1

Mr. E.Raghavendra Yadav

Head of Department - MECH-2

Mechanical engineers develop state-of-the-art technologies and exhilarating solutions for the mankind. We attempt to provide our students with a cheerful, productive and satisfying experience at all levels of their program of studies to explore the amazing world of mechanical engineering.


Programmes offered

DiplomaIntake
DME (Diploma in Mechanical Engineering)120
Under GraduateIntake
B.Tech (Mechanical Engineering)240
Post GraduateIntake
M.Tech.(CAD/CAM)18
M.Tech.(Thermal Engineering)18

Research

S.No Name of the facultyResearch AreaTitle
1 Dr. Akhilesh Kumar Singh Humidity control Eco- friendly humidity controller for room & office purpose
2 Mr. M. Srinivas IC Engines Improvement of fuel efficiency in a petrol engine by using water injection
3 Mr. Ch. Pavan kumar Vortex tube refrigeration Experimental enhancement on the performance of vortex tube
4 Mr. K. Vijay Heat transfer Experimental analysis an heat transfer through twisted pin-fin
5 Dr. M. Murugan Solar thermal collector Performance enhancement of twist inserted solar collector using booster reflectors

Publications

S.No Name of the facultyTitleReferenceJournal
1 Mr. Pramod Kumar Numerical Modeling of Temperature Distribution in Laser Beam Welding of 304 Stainless Steel Vol. 8, Issue 3, Jun 2018, 457-468. International Journal of Mechanical and Production Engineering Research and Development
2 Mr. Pramod Kumar Numerical Simulation of Temperature Distribution in Laser Welding of AISI 316 Springer, Singapore, 2019. 237-246 Advances in Industrial and Production Engineering.
3 Mr. Pramod Kumar Studies on Numerical Simulation of Temperature Distribution in Laser Beam Welding of 304L Austenitic Stainless Steel. 9.1 (2019): 30-49. International Journal of Manufacturing, Materials, and Mechanical Engineering
4 Mr. Pramod Kumar Microstructure and mechanical properties of pulsed Nd: YAG laser welding of st37 carbon steel 133 (2018): 733-739 Procedia computer science
5 Mr. Pramod Kumar Effect of heat input in pulsed Nd: YAG laser welding of titanium alloy (Ti6Al4V) on microstructure and mechanical properties 63.3 (2019): 673-689. Welding in the World
6 Mr. Pramod Kumar Effect of average beam power on microstructure and mechanical properties of Nd: YAG laser welding of 304L and st37 steel - World Journal of Engineering (2019).
7 Mr. Pramod Kumar Studies of temperature distribution for laser welding of dissimilar thin sheets through finite element method. 40.9 (2018): 455. Journal of the Brazilian Society of Mechanical Sciences and Engineering
8 Mr. Pramod Kumar Effect of pulse width in pulsed Nd: YAG dissimilar laser welding of austenitic stainless steel (304 L) and carbon steel (st37). Processing 5, no. 4 (2018): 317-334. Lasers in Manufacturing and Materials
9 Mr. K.Vijay Analysis of condense in a thermal power plant for possible augumentation inits heat transfer performance vol-14,no.2 -2015 IJSPR
10 Mr. K.Vijay Thermal analysis of forced convective heat transfer through free like biending fins vol-6,no.2, 2016 International Journal of Thermal Technologies
11 Mr. K.Vijay Experimental enhancement on the quality of steam by using separating & throttling calorimeters Accepted 2019 International information and Engineering technology association
12 Dr. Akhilesh Kumar Singh Mehanical TIG welding gives consistant bead geometry, a case study vol-2, issue-8,2015 Recent Technologies in Mechanical & Electrical Engineering
13 Dr. Akhilesh Kumar Singh A study on effect of preheating and post weld heat treatment of grade P91 steel. vol-2, no-8,2015,PP.57-62 Materials science and Mechanical Engineering
14 Dr. Akhilesh Kumar Singh Opinion regarding chemical technology and its applications P(1),2017 Journal of chemical technology and its applications
15 Dr. Akhilesh Kumar Singh Weld bead geometry dimensions measurement based on pixel intensity by image analysis 100(2);PP.379-384, 2019 Journal of Institution Engineers
16 Dr. Akhilesh Kumar Singh A study to increase weld penetration P91 steel during TIG welding by using Activating fluxes 225(2017),012099 Material science and Engineering
17 Dr. Akhilesh Kumar Singh A study to increase weld penetration P91 steel during TIG welding by using a backing medium - Journal of Materials Today Elsevier proceedings
18 Dr. Akhilesh Kumar Singh Techniques to improve weld penetratyion in TIG welding (A review) (2017) PP. 1252-1259 Journal of Materials Today Elsevier proceedings
19 Dr. Akhilesh Kumar Singh An approach to maximize weld penetration during TIG weilding of P91 steel plates by utilizing image processing &taguchi orthogonal array Vol 98(5), (2107), 98(5), PP.541-551 Institution of Engineers
20 Dr. Akhilesh Kumar Singh A study on enhanced the depth of penetration in grade p-91 steel plate using Alumina as a flux in FB TIG Welding Vol 42(11),(2017) PP.4959-4970 Arabian Journal of science & engineering
21 Dr. Akhilesh Kumar Singh Study on effect of high temperature inserts cerimic fiber insulating board to weld grade P-91 steel Volume 25, (2017), PP.1-7 Manufacturing process
22 Dr. M. Murugan Performance enhancement of v-trough solar concentractor with peripherally oblique-cut twist Volume 14, 3401-12 TAGA Journal of graphic technology
23 Dr. M. Murugan Infuence of corrugated booster reflectors in a centrally finned twist inserted solar collector on heat transfer and thermal performance characteristics Vol 141, 62001-1-9 Journal of heat transfer
24 Dr. M. Murugan Performance enhancement of centrally finned twist inserted solar collector using corrugcted booster refelctor Volume 168, 2018 Energy
25 Dr. T.Srihari “Mathematical Modelling in Automatic Submerged Arc Welding” (JOM-7)., 31st May –2nd June, 1995 Helsingor , Denkmark. Proceedings of Seventh International Conference for joining of Materials
26 Dr. T.Srihari Mathematical Models for Predicting weld Bead Shape and Dimensions in Automatic Submerged Arc welding 1-4 April 1991, Maryland, U.S.A. International Conference on “Mathematical and computer Modelling”
27 Dr. T.Srihari “Weld Bead Geometry Prediction” May 95, Vol. 76, p. 39-43. Institution of Engineers (INDIA)
28 Dr. T.Srihari Optimization of Process parameters for a modified chisel edge HSS drill e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 2 Ver. I (Mar- Apr. 2014) IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE)
29 Dr. T.Srihari “Performance Evaluation of Cryogenic Treated HSS Drill” Volume 13 Issue 7 Version 1.0 Year 2013 ,Online ISSN: 2249-4596 & Print ISSN: 0975-5861. Global Journal of Researches in Engineering Mechanical & Mechanics
30 Dr. T.Srihari “Design and performance evaluation of a horizontal hydraulic honing attachment to lathe" Vol. 6, No. 1, 2014, pp. 106-111. International Journal of Engineering, Science and Technology
31 Dr. T.Srihari “Properties of SiCp / Al2O3 ceramic matrix composites prepared by directed metal oxidation of aluminum alloy”. Vol- 1, Number 1 (2011), pp. 11-28. International Journal of Mechanical and Material Sciences research
32 Dr. T.Srihari “Phase, micorstructure and physical properties of SiCp / Al2O3 ceramic matrix composites prepared by directed metal oxidisation process ISSN 0973 – 4589 Vol -6, Number 4 (2011), pp. 473-484. International journal of Material Science
33 Dr. T.Srihari “Fabrication of SiCp / Al2O3 ceramic matrix composites prepared by directed metal oxidisation of aluminum alloy” ISSN 2231 – 1211 vol – 2 Number 3 (2011), International journal of Advanced material science
34 Mr. V.S.Nagi Reddy Design and CFD analysis on coated steam turbine blade Mahratta chamber of commerce Mahratta chamber of commerce
35 Mr. A.Arif Optimization of helical spring weight using meta heuristic algorithms Vol. 5 issue 2, 2018 STM journals
36 Mr. K.Vijay Experimental analysis on thermal behavior of water based nano-fluid (Al2O3) using separating and throttling calorimeter Vol. 5 issue 1, 2019 International Journal for Science and Advance Research in Technology
37 Mr. K.Vijay Thermal Analysis of Shell And Tube Heat Exchanger Using Corrugated Tube And Corrugated Shell Vol. 5 issue 3, 2017 International Journal of Innovative Technology and Research
38 Mr. M.Srinivas Heat trnasfer enhancement in double pipe heat exchanger using water based nano-fluid(SiO2) with twisted tape inserts Vol. 5 issue 2, 2019 International Journal for Science and Advance Research in Technology
39 Mr. M.Srinivas Nanomaterial and thermal properties Vol. 4 issue 9, 2018 International Journal of Technical Innovation in Modern Engineering & Science
40 Mr. M.Srinivas Accommodative capabilities of smart material Vol. 5 issue 9, 2018 Journal of Emerging Technologies and Innovative Research
41 Mr. M.Srinivas Improvement of fuel efficiency in a petrol engine by using water injection Vol. 15, issue 2, 2017 International Journal of Chemical Sciences
42 Mr. K.Vijay Vijay Heat performance analysis on single loop pulsating heat pipe volume 2 issue 4 December 2016 pipe Open journal of technology & engineering disciplines
43 Mr. K.Vijay analysis of forced convective heat transfer on tree like branching fins volume 6 issue 2 june 2016 International journal of thermal technologies
44 Mr. M.Srinivasa Reddy Structural and model analysis of brake disc of different materials volume 3 issue 2 2016 International journal of research and innovation
45 Mr. D.Deepu Structural and model analysis of multi stage centrifugal pump rotor assembly using different materials volume 2 issue 1 june 2016. International journal of research and innovation
46 Mr. T.S.S Bhaskar rao CFD Analysis on pulsating heat pipe to improve heat transfer Volume 3 issue 1 june 2016 International journal of research and innovation in thermal engineering